|
D-STAR DV mode available (Digital Voice + data)
The IC-80AD/E80D and ID-880H/E880 are compatible with the JARL D-STAR* format and provide DV mode operation with an AMBE® codec. 950bps (approx.) slow data can be sent simultaneously with the digital voice transmission.
* Digital Smart Technology for Amateur Radio
D-STAR repeater list
The IC-80AD/E80D and ID-880H/E880 can store up to 300 channels/callsigns in the repeater list. Each channel memorizes a repeater frequency, duplex direction, offset frequency, callsign, gateway callsign and RPT1 (Repeater 1) use setting. The RPT1 use setting is a convenient function to flag an often used uplink D-STAR repeater to access. The access repeater scan finds an available D-STAR repeater from the RPT1 use repeater.
GPS position reporting functions and GPS A mode for easy D-PRS operation
Used with an external GPS receiver or GPS speaker-microphone (HM-189GPS for IC-80AD/E80D),the IC-80AD/E80D and ID-880H/E880 show your position data on the display and own and otherstation’s position information can be sent and received*. The IC-80AD/E80D and ID-880H/E880Hsend the position data either by holding the PTT switch, or at a preset interval (5 seconds–30 minutes),depending on the setting. In addition, the GPS A mode assists in easy D-PRS mode operation,to send your position information to an APRS server from the D-STAR radio.
* GPS data receive only is possible when no external GPS receiver or GPS speaker-microphone is attached.
Plotting position information on mapping software
When connected to a PC* via the optional RS-232C cable, the position information can be plottedon mapping software* on a PC.
* Serial port and position mapping software (NMEA 0183 format) are required.
GPS memory and GPS alarm
The GPS memory stores up to 50 received or user programmed position information with 6-characterchannel memory name. The GPS alarm sounds when your own position is close to the specifiedpoint or area.
Other digital features
- One touch reply function* (* Cannot call JA stations by using this function.)
- Digital code squelch
Switchable VHF/UHF dual bander
The IC-80AD/E80D and ID-880H/E880 provide VHF/UHF dual band capabilities (one band at a time)via a simple band switching system.
Wideband receiver
The IC-80AD/E80D and ID-880H/E880 have a wideband receiver as a standard feature. The IC-80AD/E80D series covers 0.495–999.99MHz* and the ID-880H/E880 covers 118–173.995,
230–549.995 and 810–999.990MHz.* You will be able to listen to aviation, marine, weather channelsand other utility communications*.
* Receiver range depending on versions. See specification page.
Total 1052 memory channels
The IC-80AD/E80D and ID-880H/E880 have a total 1052 memory channels (including 1000 regularchannels, 50 scan edges and 2 call channels) with 26 memory banks. All memory channels andprogram scan can be named with 8-character channel comments. Also a memory bank can benamed with a 6-character bank name comment.
Multiple scan function
The IC-80AD/E80D and ID-880H/E880 support various scan types for maximum reception and
ease of use.
• Full scan • Selected band scan • Programmed scan • Memory scan
• Memory mode scan • All bank scan • Selected bank scan • Bank link scan (DMS)
• Program scan link • Skip scan • Priority scan • Tone scan
• Access repeater scan
Built-in CTCSS/DTCS encoder and decoder
Built-in CTCSS and DTCS tones are used for accessing a closed repeater or tone squelch operation.The pocket beep alerts you with a beep sound when the transceiver receives a preset tone 1750Hz tone is also available.
Other common features
- Monitor function to listen to a weak signal.
- Variable tuning steps (IC-80AD/E80D: 14 steps, ID-880H/E880: 13 steps)
- Auto repeater function automatically turns on/off duplex operation and tone encoder
- 16 DTMF memory channels (24 digits)
- Key lock function
|
